china Sintered mesh manufacturers are composed of multiple stainless steel woven meshes of the same kind or different, repeatedly pressed, rolled and repeatedly vacuum sintered at 1260°C, then formed by diffusion and solid solution, and have strong mechanical properties. It is made of fine metal fibers with different wire diameters laid by non-woven fabrics, overlapping configuration and high temperature vacuum sintering at 1180 °C. How to make sure it doesn't rust?
1.china Sintered mesh manufacturers have bleach and various acid adhesion on the surface. Immediately rinse with water, then soak with ammonia solution or neutral carbonated soda solution, and wash with neutral detergent or warm water.

2. There is dust on the surface of stainless steel china Sintered mesh manufacturers, it is easy to remove the dirt, it can be washed with soap, weak detergent or warm water.
3. Label, film, wash with warm water, weak detergent, adhesive component, scrub with alcohol or organic solvent (ether, benzene). The grease, oil and lubricating oil on the stainless steel surface is contaminated, wipe it off with a soft cloth, and then clean it with neutral detergent or ammonia solution or special detergent.
4. In order to prolong the service life of stainless steel and keep it clean, nitric acid can also be used to remove oil stains on the surface.