Braided customized Copper wire mesh products production equipment, including a guide assembly, a transmission assembly and a workbench, the top of the workbench is fixedly installed with a guide assembly, one side of the guide assembly is fixedly installed with an electric push rod, the electric push rod A cutting knife is fixedly installed at the output end of the casing, a motor is fixedly installed on both sides of the casing, a transmission assembly is fixedly installed at the output end of the motor through a belt, and a support seat is installed at the bottom of the casing at an equal distance. In the utility model, a guide assembly is fixedly installed on the top of the worktable, the threaded rod can be rotated, and then the threaded rod and the rotating shaft are used in cooperation to drive the auxiliary frame to move up and down, so as to use the auxiliary wheel to cooperate with the guide wheel to drive the weaving of customized Copper wire mesh products Move to prevent damage during the production of the woven wire mesh, then use the support table to support the woven wire mesh, and then use the electric push rod to drive the cutting knife to cut the woven wire mesh.

The above is a brief introduction to the production equipment related to the preparation of customized Copper wire mesh products.