Nickel wire mesh in china winding device for elastic mesh loom, including base, winding roller, limit block and gear, the upper end of the base is welded with a support frame, and the middle of the support frame is respectively provided with a guide roller and two guide rollers , The surface of the winding roller is provided with a fixing groove, and the winding roller is connected to the driving device through a transmission rod, and the driving device is bolted on the support plate, the limit block is built in the middle of the sliding groove, and the upper end of the limit block is provided with There is a fixed buckle, and the lower end of the limit block is provided with a limit slot, the gear tooth slot is fixed in the middle of the limit slot, and the gear is connected with the adjustment knob through the rotating shaft. The elastic mesh loom uses Nickel wire mesh in china winding device The Nickel wire mesh in china that needs to be wound is fixed on the winding roller through the fixing buckle, so that the Nickel wire mesh in china will not slide during the winding process. At the same time, the sliding groove can fix the Nickel wire mesh in china It is brought into the winding roller to prevent the Nickel wire mesh in china from being wrinkled during the winding process.

The above is a brief introduction to the relevant knowledge of the Nickel wire mesh in china winding device for elastic mesh looms.