How much do you know about the diamond-shaped metal mesh connection device? Follow the editor of Low price Perforated metal mesh to have a simple understanding of it!

The right part of the outer wall of the lower end of the first telescopic rod is welded with a slot plate, the bottom ends of the two telescopic rods are welded with a pressure plate, the two fixed cylinders pass through the hand-held part, and the top of the two fixed cylinders are welded with a pressure plate, A spring is installed between the pressing plate and the hand-held portion, the spring is located on the outer walls of the two fixing cylinders, the top right part of the hand-held portion is welded with a pinned fixing device, and the pinned fixing device is located on the right part of the pressing plate , By closing the pressure plate and the card groove plate, the steel wire will not slip off the card groove plate due to resistance, set the pressure plate and the spring, so that the pressure plate can automatically rise, and set the pin fixing device, so that in the process of rotating the connection There is no need to keep close to the pressing plate continuously, which reduces labor intensity.
The above is the low price Perforated metal mesh editor's description: a brief introduction to the knowledge of diamond-shaped metal mesh connection devices.