language
中国
韩国
韩国
韩国
韩国
韩国
News Center
Position:
Home
-
-
-
How to compile Sintered mesh on sales

How to compile Sintered mesh on sales

(Summary description)Stainless steel Sintered mesh on sales forms square or rectangular openings, and the hole width of the mesh is approximately equal to the wire diameter. This woven wire mesh has sufficient strength within 10 to 60 mesh, and the filter mesh of finer mesh has lower strength.

How to compile Sintered mesh on sales

(Summary description)Stainless steel Sintered mesh on sales forms square or rectangular openings, and the hole width of the mesh is approximately equal to the wire diameter. This woven wire mesh has sufficient strength within 10 to 60 mesh, and the filter mesh of finer mesh has lower strength.

Information

Do you know what the compilation method of Sintered mesh on sales is? Let’s take a look at it briefly below!
1. Plain weave structure: stainless steel Sintered mesh on sales forms square or rectangular openings, and the hole width of the wire mesh is approximately equal to the wire diameter. This woven wire mesh has sufficient strength within 10 to 60 mesh, and the filter mesh of finer mesh has lower strength.
2. Twill or flat twill: Thicker wire can be used with a given number of holes to increase the strength of the net. Of course, the holes are small. If necessary, the number of wefts can be appropriately reduced to form rectangular holes.
3. Twill Dutch weave: divided into twill double Dutch weave and twill single Dutch weave, the holes or channels are slit-shaped or triangular, which can retain fine particles to 1pm. Twill Double Holland has a tight weft and almost complete coverage of the warp.


4. Plain dutch weave: the warp is thick and the weft is very thin, forming a triangular eyelet, that is, not a "straight channel", and the aperture is 15-340/tm. The mesh of this tissue is strong, tight, and strong, and can have relatively low pressure losses at higher throughput rates. You can also use two warp threads instead of one warp thread, the strength of the wire mesh is greater, or the holes are smaller; you can also use more fine weft threads, so that the filtration rate of the medium is large, and the holding capacity is also large.
5. Anti-plain Dutch grain: The organization of the plain Dutch grain is the same, but the weft is thicker or the warp is thinner. The retention particle size can be as small as 8pm. The anti-Dutch pattern improves the strength of the filter screen, is easy to clean, has a large flow rate, and has a strong retention capacity.
The above is a brief introduction to the knowledge related to the compilation method of Sintered mesh on sales.

Keyword:

Scan the QR code to read on your phone

Related News

SEARCH

搜索
Search

INQUIRY

Username used for comment:
客户留言
Description:

© 2020 Hengshui heli wire cloth co.,Ltd.  All rights reserved.        冀ICP备09004040号-1